BKRRF - FSA ADHESIVE, 21991

  • MSDS: BKRRF
  • Manufacturer: BOWMAN DISTRIBUTION
  • Product Name: FSA ADHESIVE, 21991
  • National Stock Number: 8040-00N016027
Product Identification

Product ID:FSA ADHESIVE, 21991
MSDS Date:10/03/1988
FSC:8040
NIIN:00N016027
MSDS Number: BKRRF

Responsible Party
BOWMAN DISTRIBUTION
850 EAST 72ND ST.
CLEVELAND, OH 44103

Emergency Phone: 216-391-7200

Info Phone: 216-391-7200

Cage: 05575

Contractor
BOWMAN DISTRIBUTION, BARNES GROUP INC.
CLEVELAND, OH 44103 US

Telephone: (216) 391-7200

Cage: 05575

Ingredients

ETHYL-2-CYANOACRYLATE (MFR CAS 7085-85-0)

CAS: 708-85-0

Fraction By Weight: 90%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: ADHESIVE BONDS SKIN RAPIDLY AND
STRONGLY, IRRITATES EYES, MUCOUS MEMBRANES. CHRONIC: NONE REPORTED.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:IRRITATES EYES AND MUCOUS MEMBRANES.
Medical Cond Aggravated by Exposure:PRE-EXISTING EYE, SKIN AND RESP
DISORDERS MAY BE AGGRAVATED.

First Aid

First Aid:INHAL: MOVE TO FRESH AIR. INGEST: INDUCE VOMITING, CALL PHYS.
EYES: FLUSH WITH WATER QUICKLY FOR AT LEAST 15 MINUTES CAREFUL NOT
TO FORCE TISSUES STRONGLY BONDED AS THIS WILL BE REJECTED WITH
TIME.

Fire Fighting

Flash Point Method:TCC
Flash Point:176F,80C
Extinguishing Media:FLUSH WITH LARGE QUANTITIES OF WATER OR A DRY
CHEMICAL EXTINGUISHER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:ABSORB WITH TISSUE/PAPER OR CLOTH TOWELS AND
REACT LIQUID WITH WATER TO WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID MOISTURE, DO NOT STORE ABOVE 122
F. KEEP CONTAINERS TIGHTLY CLOSED. AVOID CONTACT WITH SKIN, EYES
AND BREATHING.
Other Precautions:AVOID DIRECT EXPOSURE TO SUNLIGHT AND ALKALINE
MATERIALS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED CARBON DISC MASK OR NOT
NECESSARY AT TLV'S BELOW 2-5 PPM.
Ventilation:LOCAL EXHAUST: NORMALLY NOT REQUIRED. MECH: SEALED WATER
SCRUBBER.
Protective Gloves:RUBBER OR VINYL.
Eye Protection:CHEMICAL WORKERS (SEE SUPP DATA)
Other Protective Equipment:RUBBER APRON TO AVOID CLOTHING DAMAGE WITH
LARGE USAGE
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EYE PROT: GOGGLES. MAY ADD FULL LENGTH FACESHIELD TO GOGGLES. .

Chemical Properties

HCC:V4
Boiling Pt:B.P. Text:149F,65C
Vapor Pres:11 @ 29C
Vapor Density:<4
Spec Gravity:1.07
Solubility in Water:INSOLUBLE
Appearance and Odor:TRANSPARENT WATER-WHITE STIMULATIVE, LIQUID
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
POLYMERIZED BY WATER, ALCOHOLS, AMINES AND ALKALINES.
Stability Condition to Avoid:HIGHER THAN 176F TEMPERATURE HEAT/MOISTURE
AND ALKALINES.
Hazardous Decomposition Products:TYPICAL COMBUSTION PRODUCTS OF CO,
CO*2 AND NITROGEN OXIDES.

Disposal

Waste Disposal Methods:INCINERATE OR DUMP SOLID WASTE AS PLASTIC
CHEMICAL WASTE FOR TREATMENT. DISPOSAL MUST BE I/A/W FEDERAL,
STATE, AND LOCAL REGS. .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.